H型鋼在冷床上直立冷卻后，由輥道送至變節距輥式矯直機進行長尺矯直，經成排臺架成排后，由冷鋸機切成6～24m定尺。切成定尺的軋件經人工目測檢查后，進入堆垛臺架堆垛，經打捆、稱重、標牌后進入成品臺架，由成品跨吊車吊運入庫、發貨。

H type steel upright in the cooling bed after cooling by roller to pitch roller straightening machine straightening ruler, the rows of bench rows, a cold sawing machine into 6 ~ 24m length. The rolled pieces, which are cut into fixed lengths, are inspected and inspected after manual inspection. They enter stacks stacking, and then enter the finished rack by bundling, weighing and sign.

軋制時毛坯的位置固定，因此不需設置側向支撐毛坯的導向尺?？傊?，它適用于軋制復雜外形結構，精度要求高，零件品種變換很多的情況。但其行程大小受到限制，所以，變形程度也受到影響，同時，板式軋機有空行程，故影響到生產率和變形程度都不能很大。

The of the blank is fixed during rolling, so there is no need to set the guide bar of the side supporting blank. In short, it is suitable for rolling complex shape structure with high accuracy and many varieties of parts. But the stroke size is limited, so the degree of deformation is also affected. At the same time, the plate mill has an empty travel, so the productivity and deformation can not be very large.

軋機專業廠家介紹，其實從實際生產作業來看，關于冷軋機的安全生產主要包括三個方面，分別為：定期檢修、日常安全操作以及日常的培訓管理等。

In fact, from the actual production operation, the safety production of the cold rolling mill mainly includes three aspects, which are the regular maintenance, the daily safety operation and the daily training etc.