彎曲度：工字鋼高度小于或等于400MM時，每米彎曲度不得大于1.5MM，總彎曲度不得大于總長度的0.15%。高度大于400MM時，每米彎曲度不得大于1.0MM，總彎曲度不得大于總長度的0.1%。

Bending degree: when the height of the I-steel is less than or equal to 400MM, the bending degree of each meter must not be more than 1.5MM, and the total bending degree should not be more than 0.15% of the total length. When the height is greater than 400MM, the bending degree of each meter must not be more than 1.0MM, and the total bending degree should not be more than 0.1% of the total length.

普通工字鋼和輕型工字鋼的型號是用其腰高厘米數的阿拉伯?dāng)?shù)字來表示，腹板、翼緣厚度和翼緣寬度不同其規格以腰高×腿寬(b)×腰厚(d)的毫數表示，如“普工160×88×6”。

The ordinary beam and light I-beam model is the digital Arabia with its waist high cm number to represent, web and flange thickness and flange width of different specificati to the waist high (H) * (b) * waist leg width thickness (d). The number of said, such as "general 160 x 88 x 6"

型材按使用部門分類有鐵路用型材（鋼軌、魚尾板、道岔用軌、車輪、輪箍）、汽車用型材（輪輞、輪胎擋圈和鎖圈）、造船用型材（L型鋼、球扁鋼、Z字鋼、船用窗框鋼）、結構和建筑用型材（H型鋼、工字鋼、槽鋼、角鋼、吊車鋼軌、窗框和門框用材、鋼板樁等）、礦山用鋼（U型鋼、槽幫鋼、礦用工字鋼、刮板鋼等）、機械制造用異型材等。按斷面尺寸大小分類。I-steelbeam(alsoknownasEnglishnameIBeam),isanH-shapedsteelstripsection。