旋緊緊力螺栓。所有緊力螺栓均需用力矩板手按標明的固定扭力矩數據進行固定和檢查。減速機與機械設備間的正確安裝類同減速機與驅動電機間的正確安裝。關鍵是要必須保證減速機輸出軸與所驅動部分軸同心度一致。

Tighten tight bolt. All tight bolts must be fixed and checked with the fixed torque data marked by the torque plate hand. The correct installation between the reducer and the mechanical equipment is the same as that between the reducer and the driving motor. The key is to ensure that the output shaft of the reducer is cistent with the of the drive shaft.

減速器是一種由封閉在剛性殼體內的齒輪傳動、蝸桿傳動、齒輪-蝸桿傳動所組成的獨立部件，常用作原動件與工作機之間的減速傳動裝置 。在原動機和工作機或執行機構之間起匹配轉速和傳遞轉矩的作用，在現代機械中應用極為廣泛。

The reducer is an independent component  of gear transmission, worm drive and gear worm drive enclosed in a rigid shell. It is often used as a deceleration between the original and the working machines. The matching speed and transfer torque between prime movers and working machines or actuators are widely applied in modern machines.

減速電機分類：

1、大功率齒輪減速電機

2、同軸式斜齒輪減速電機

3、平行軸斜齒輪減速電機

4、螺旋錐齒輪減速電機

5、YCJ系列齒輪減速電機

Deceleration motor classification:

1. High power gear reducer

2, coaxial helical gear reducer

3, parallel axis helical gear deceleration motor

4, spiral bevel gear reducer

5, YCJ series gear deceleration motor

減速機內部齒面硬度 隨著齒輪硬齒面技術的發展，其承載能力大、體積小、重量輕、傳動精度高等特點使其應用領域日趨廣泛。但為獲得硬齒面采用的滲碳淬硬使齒輪產生變形，導致齒 輪傳動噪聲增大，壽命縮短。

With the development of hard tooth surface technology, the internal hardness of gear reducer has been widely used because of its large bearing capacity, small volume, light weight and high transmission accuracy. But the carburizing and hardening used to obtain the hard tooth surface causes the deformation of the gear, which results in the increase of the noise of the gear transmission and the shortening of the service life.