五金沖壓件與鑄件、鍛件相比，具有薄、勻、輕、強的特點。沖壓可制出其他方法難于制造的帶有加強筋、肋、起伏或翻邊的工件，以提高其剛性。秦皇島五金沖壓件由于采用精密模具，工件精度可達微米級，且重復精度高、規格一致，可以沖壓出孔窩、凸臺等。冷沖壓件一般不再經切削加工，或僅需要少量的切削加工。熱沖壓件精度和表面狀態低于冷沖壓件，但仍優于鑄件、鍛件，切削加工量少。

手鋸鋸削的注意事項

鋸條的松緊要合適，且鋸割時壓力不能太大，以防折斷傷人；

當鋸縫歪斜時，不可急于糾正，而需要慢慢地逐步糾正。

Notice of hand saw cutting

The tightness of the saw blade should be suitable, and the pressure should not be too large during sawing, so as to prevent breaking and hurting people.

When the SAW seam is skewed, it can not be corrected in a hurry, but it needs to be corrected gradually.

檢查、核對模具和沖壓機床。在安裝模具前，要確認沖壓機床為沖壓工藝的型號，并檢查模具的尺寸、工作要求是否與沖壓機床的技術參數（裝模高度、滑塊行程等）相匹配，沖壓機床的狀態足否良好。

Check and check die and stamping machine. Before installing the mould, it is necessary to confirm that the stamping machine is the designated type of the stamping process, and check the size of the die and the work requirements to match the technical parameters of the designated stamping machine (the height of the die, the slider stroke, etc.), and the state of the stamping machine is good or not.