我國減速機行業發展歷史已有近40年，在國民經濟及工業的各個領域，減速機產品都有著廣泛的應用。允許輸入法蘭：不能大于或小于臨級減速機的標準尺寸，如減速機PLE80。食品輕工、電力機械、建筑機械、冶金機械、水泥機械、環保機械、電子電器、筑路機械、水利機械、化工機械、礦山機械、輸送機械、建材機械、橡膠機械、石油機械等行業領域?qū)p速機產品都有旺盛的需求。

China's speed reducer industry has been developing for nearly 40 years. In all fields of national economy and national defense industry, the reducer has a wide range of applicati. Food industry, electrical machinery, ctruction machinery, metallurgical machinery, cement machinery, environmental protection machinery, electronic appliances, ctruction machinery, hydraulic machinery, chemical machinery, mining machinery, transportation machinery, building materials machinery, rubber machinery, petroleum machinery and other industries on the reducer products have strong demand.

在電機與減速機連接前，應先將電機軸鍵槽與緊力螺栓垂直。為保證受力均勻，先將任意對角位置的安裝螺栓旋上，但不要旋緊，再旋上另外兩個對角位置的安裝螺栓后逐個旋緊四個安裝螺栓。

Before connecting the motor to the reducer, the key slot of the motor shaft should be perpendicular to the tightening bolt first. To ensure uniform force, screw the mounting bolts at any diagonal ition first, but do not tighten them. Then screw the mounting bolts on the other two diagonal iti, and tighten the four mounting bolts one by one.

減速機與工作機的安裝關系：為了避免工作機主軸撓曲及在減速機軸承上產生附加力，減速機與工作機之間的距離，在不影響正常的工作的條件下應盡量小，其值為5-10mm。

The relatihip between the reducer and the working machine is: to avoid the additional force of the spindle and the additional bearing on the reducer bearing, the distance between the reducer and the working machine should be as small as sible without affecting the normal working conditi, and its value is 5-10mm.

齒輪聲輻射特征分析 在選擇用不同結構形式的齒輪時，對其特定結構建立聲輻射模型，進行動力學分析，對齒輪傳動系統噪聲進行預先評估。減速機的主要特點是具有反向自鎖功能，可以有較大的減速比，輸入軸和輸出軸不在同一軸線上，也不在同一平面上。以便根據使用者的不同要求（使用場所，是 否無人操作，是否在城區內，地上、地下建筑物有無特定要求，是否有噪聲防護，或無其他特定要求）去滿足。

The acoustic radiation characteristic analysis of gear in the selection of gear with different structure forms, set up the acoustic radiation model to its specific structure, carry on the dynamic analysis, and evaluate the gear transmission system noise in advance. In order to meet the users'  requirements (use sites, unmanned operati, whether there are specific requirements in the urban area, ground or underground buildings, noise protection, or other specific requirements).