切向鍵聯接：它由兩個普通楔鍵組成。其上下兩面（窄面）為工作面，其中之一面在通過軸心線的平面內。工作面上的壓力沿軸的切線方向作用，能傳遞很大的轉矩。

Tangent key join: it cists of two common wedges. Both sides of the upper and lower sides (narrow surface) are working faces, one of which is in the plane of the axis of the axis. The pressure on the working face acts along the direction of the shaft and transmit a large torque.

與平鍵聯接比較，花鍵聯接在強度、工藝和使用方面有下列特點：在軸上與轂孔上直接而均勻地制出較多的齒與槽，故聯接受力較為均勻；因槽較淺，齒根處應力集中較小，軸與轂的強度削弱較少。

Compared with the flat bond connection, the spline connection has the following characteristics in strength, process and use.More teeth and grooves are made directly and evenly on the shaft and hub hole, so the joint force is more uniform.

Because of the shallow groove, the stress at the root of the tooth is small, and the strength of the shaft and hub is weakened less.

型面聯接：是利用非圓剖面的軸與相應形狀的零件的轂孔配合而構成的聯接，作為機械傳動中的聯接方式，型面聯接相對于傳統的鍵聯接相比，具有聯接強度高，沒有應力集中，可以傳遞大扭矩且的同時也可以承受沖擊載荷，并且對于一些大型機械裝備來講其拆裝方便及維修便利。

is the hub hole type surface connection: the non-circular section axis and the corresponding shape parts with a connection, as the connection mode in mechanical transmission, compared with the traditional linkage type surface connection compared with connecting strength, no stress , can  large torque and high efficiency at the same time it can withstand the impact load, and for some large mechanical equipment for its disassembly and convenient maintenance.